Publicidad
Idiomas disponibles
Idiomas disponibles
Installation:
1. Unscrew the mounting plate and take it off. (Fig. 1/Fig.2)
2. Drill a hole as the instruction. Then put into the bolt and fix it with cement.
(Fig.3)
3. Hanging on the mounting plate and ensure fix it. (Fig.4)
4. Installing the machine onto the mounting plate and ensure the safety,
than fix it tighten with screws. (Fig.5)
Cautions / installations:
During installing the unit, please pay special attention to the following points
in order to obtain the ultimate efficiency.
1. Install on solid place to avoid vibrations when machine is running and
also for safety reason unnecessary noise caused by vibration can be pre-
vented.
2. AIR CURTAINS are used for indoor purpose.
3. Depending on the height to choose the most suitable model. If it fixed too
high, the shut-off distance will be affected then the efficiency will be reduced.
4. The air is drawn in front of the unit and is blown out downwards.
5. Several units can be mounted next to each other when wide door opening
occur. Under such condition, a narrow space in between 20-40 mm may
happened.
6. During installation, the mounting plate should not have a gap between the
walls.
6
Publicidad
