Descargar Imprimir esta página

cecotec READYWARM 2000 FLAMES Manual De Instrucciones página 39

Chimenea eléctrica

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
Operation
-
Always use the heater in an upright position, and follow all instructions and
recommendations mentioned in this manual.
Place the heater in the coldest part of the room.
-
Flame effect: to activate the flame effect, press the switch
-
deactivate this effect, press the switch
other switches are in the off position, the appliance will operate without providing heat.
Medium power switch: set the adjustable temperature selector to the on position. Set the
-
medium power switch in the on position (I).
High power switch: set the adjustable temperature selector to the on position. Set the
-
high-power switch in the on position (I).
Adjustable temperature selector
Use the adjustable temperature selector to select the desired temperature level. Note
-
that turning the selector up will raise the temperature and turning it down will lower the
temperature.
If the adjustable temperature selector is in the off position, the appliance will not heat,
-
even if the medium power switch and/or the high-power switch remain in the on position,
i.e., they are de-energised.
Important safety features
The heater is equipped with an automatic overheating protection device, located inside the
heating body. If the heater grille is obstructed, or if the heater gets too hot for any reason, the
automatic overheat protection device will turn the heater off. To reset the heater, simply switch
off and unplug it for 10 minutes until it cools down. The heater can then be plugged in and
restarted. Make sure that the heater is on a smooth, level surface without obstacles.
4. CLEANING AND MAINTENANCE
Cleaning
CAUTION: before cleaning the heater, be sure to unplug the power cord and allow it to cool
completely.
Clean the housing with a clean damp cloth. Do not use chemical or harsh abrasive cleaning
-
agents. Do not immerse the appliance in water or any other liquid. Allow the heater to dry
completely before use.
Use a hoover or duster to keep the heating and ventilation area clean, free of dust and dirt.
-
Repair
DO NOT USE THE HEATER IF THE GRILLE IS NOT IN PLACE. DO NOT USE THE HEATER IF IT HAS
BEEN DAMAGED IN ANY WAY. DO NOT REMOVE THE REAR COVER OF THE HEATER. THERE ARE
NO REPAIRABLE PARTS.
to the off position (O). Please note that if all
READYWARM 2000 FLAMES
ENGLISH
to the on position (I). To
39

Publicidad

loading

Este manual también es adecuado para:

08268