Publicidad
Idiomas disponibles
Idiomas disponibles
easily mounted by first hooking
the attachment onto the edge of
the fixed blade and then pushing
it down onto the attachment
mounting on the clipper body.
(Fig. 4)
3) To remove the comb attachment,
turn the clipper body over and
push the corner of the comb part
of the back of the attachment in
the direction indicated by the ar-
row in Fig 5. When doing this,
catch the attachment with your
other Папа. (Fig. 5)
<Mounting
and removal of
the blade>
1) Hold the clipper body with the
on/off switch facing upward and
push the blade with your thumb
in the direction indicated by the
arrow in Fig 6. When doing this,
catch the blade in your other
hand. Be sure the switch is set
to "O-charge" before attempting
to remove the blade. (Fig. 6)
2)To remount
the blade, fit the
mounting hook into the blade
mounting on the clipper body and
push in until it "clicks". (Fig. 7)
Life of the blade and
battery
<Blade Ше>
1) Although the blade life will vary
in
accordance
with
the
frequency and conditions of use,
when
used
for five haircuts
(each lasting 12 minutes) a day,
it should normally be possible to
use the blade for approximately
three months, However, in order
to
maintain
the
cutting
performance of the blade, it is
important to apply the oil before
and after each use.
2) If the cutting performance of the
blade deteriorates and cannot
be
restored
by cleaning
or
applying the oil, it indicates that
the blade
has
exceeded
its
useful life, and that it is time to
replace it.
<Battery life>
Although the battery life will vary in
accordance with the frequency and
conditions of use, when charged
every day, it should normally be
possible to use the battery for
approximately
1 years.
If the
rechargeable battery is not charged
for longer than 6 months, it will self
discharge, resulting in a shortening
of its life. Therefore, even if the
clipper is not being used, be sure
to recharge the battery at least
once every 6 months. 11 the clipper
can be operated for only about 10
minutes after it has been correctly
recharged for 8 hours, it indicates
that the battery has exceeded its
useful life and that it is time to
replace it.
Blade Maintenance
<Always clean the blade after
each use>
1) First disconnect the power cord
from the wall outiet, and then
use the cleaning brush to brush
off the cut hairs from the clipper
body and from around the blade.
(Fig. 8)
Publicidad
