NV Equipement Access BI SUMMERTOP Manual De Instrucciones página 18

STEP 7
10
1. Tension the straps moderately.
2. Adjust the position of the
ALTERNATIVE
ADJUSTING THE BIMINI SUPPORTS
support collars correctly
INSTALLATION WITHOUT SUPPORT
If the boat's configuration is suitable, attach the two blockers
(part 9 in the kit) to a deck element opposite the straps on the
cover.
The straps on the cover inserted in the blockers will keep the
product in the folded position.
1. Drill diameter 3.
2. Mill the holes.
3. Put silicon in the holes for sealing.
4. Screw in.
5. Use 3.5 x 16 screws (part 10 in the kit) + Washer
diameter 4 mm (part 15 in the kit).
.
BI SUMMERTOP ALU WITH SELVEDGE only on Open Hull
18
RIGHT POSITION
NO
NO
YES
Assembly instructions – March 2024
ACCESS by NV