Received Calls; Missed Calls; Dialled Calls; Status Page - Bentel Security BGSM-I Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Received Calls

If the BGSM-I is connected to a Control panel or another telephone device, this section will allow you to view the calls
received by the BGSM-I.

Missed Calls

This section will allow you to view any unanswered incoming calls.

Dialled Calls

This section will allow you to view any calls dialled by the BGSM-I whether in Contact ID Communicator mode and/or GSM
Interface mode.

Status Page

This page will allow you to monitor and control in real-time all the BGSM-I functions and, if not previously done, unblock the
SIM CARD PIN.
, , , , , ATTENTION: This page is updated every 5 seconds.

Status section

This section shows the GSM Module data. This virtual display shows the GSM Network Provider, the BGSM-I battery
charge (for the precise level, position the mouse arrow on the battery icon for a several seconds) and GSM signal reception
(indicated by 10 bars).
The virtual Comunication LED is usually GREEN. It will turn RED in the event of a breakdown in communication between
the software and the BGSM-I. If it turns AMBER, the BGSM-I is either reading the SIM CARD or receiving/making a telephone
call, under these circumstances the status update will be suspended temporarily.

Inputs section

This section shows the status of each of the 4 Inputs (GREEN LED = Input balanced; RED LED = Input Unbalanced) and any
Special functions associated with the Inputs.

Outputs section

This section shows the status of each of the 4 Outputs (GREEN LED = Output in standby; RED LED = Output activated).
If any of the Outputs has been set up as "Reserved" (refer to "Outputs page"), RED LED On, it will be possible to activate/
deactivate the Outputs in real-time by right-clicking the respective Polarity option and selecting the Activate/Deactivate sub-
option.

Events section

This section shows the events as they occur (RED LED On).

Send next periodic message on

This section shows the Date and Time of the next periodic SMS text message (refer to the SMS dialler page).

Send next periodic report on

This section shows the Date and Time of the next periodic Contact ID report (refer to the Contact ID Communicator page).

Clear call queue

This button will allow you to interrupt any ongoing calls and stop the outgoing call queue.
, , , , , This option is available ONLY when the BGSM-I operates in SMS Dialler/Contact ID Communicator mode.
BGSM-I z GSM Interface
24

Publicidad

Tabla de contenido
loading

Tabla de contenido