Publicidad
Idiomas disponibles
Idiomas disponibles
Beware of risks when using open flame or other sources of heat.
I. LIST OF COMPONENTS (FIG. 1)
Component
a
Skids
b
Plastic support (left and right)
c
Metal rod connecting the skids
d
Metal seat frame
e
Metal backrest frame
f
Seat cover with restraints
g
M6x65 mm bolt
h
M6x85 mm bolt
i
M6x34 mm bolt
j
Metal stoppers
k
M4x15 mm bolt
l
Small spacer sleeve
m
Large spacer sleeve
n
Allen wrench (size 4)
II. RECLINED CRADLE ASSEMBLY
A Phillips screwdriver will be used for the assembly (not included in the set)
1. Use the wrench (n) and bolts (i) to fasten the plastic supports (b) to the skids (a)
(FIG. 2).
2. Assemble the metal rods (c) to the skids using bolts (k) (FIG. 3).
3. Insert the metal backrest frame (e) into the supports until latches engage (FIG. 4).
4. Place the seat cover (f) on the assembled frame (FIG. 5).
5. Next, introduce the metal seat frame (d) into the bottom part of the seat cover
and fasten the latch (FIG. 6).
6. Slide the seat frame into the supports (FIG. 7) until you hear a clicking sound (FIG.
8). CAUTION! Remember to place the frame latches securely in the holes in the
supports.
7. Finally, tighten the belt under the seat.
III. RECLINED CRADLE FUNCTIONS
1. Press the buttons on the sides of the reclined cradle to adjust inclination (FIG. 9).
The reclined cradle features two reclined position settings (FIG. 10).
EN
Quantity
2
2
2
1
1
1
2
2
4
4
4
2
2
1
Publicidad
