Publicidad
Idiomas disponibles
Idiomas disponibles
Starting the air compressor
WARNING: High temperatures are generated by the
electric motor and the pump. To prevent burns or other
injuries, DO NOT touch the air compressor while it is
running. Allow it to cool before handling or servicing. Keep
children away from the air compressor at all times.
WARNING: When adjusting from a higher to a lower
pressure, turn the knob counterclockwise past the desired
setting; then, turn clockwise to reach the desired pressure.
Do not exceed the operating pressure of the tool or
accessory being used.
Close the tank drain valve (J) by turning in a clockwise
□
direction.
Plug in the power cord (E).
□
Turn the ON/OFF switch (G) to the ON position.
□
Adjust the regulated pressure gauge (D) to the working
□
pressure of the tool.
D
Connecting the air hose
Attach the end of the air hose into the connector
□
of the quick coupler (I).
Secure the connections with sealant tape to prevent
□
air leaks.
G
E
J
I
Shutting down the air compressor
CAUTION: Escaping air and moisture can propel debris
that may cause eye injury. Wear safety goggles when
opening drain valve.
Turn the ON/OFF switch (G) to the OFF position.
□
Unplug the power cord (E).
□
Reduce the pressure in the tank through the outlet hose.
□
You can also pull the pressure relief valve ring (C) and keep
it open to relieve pressure in the tank.
Tip the air compressor (if necessary for your model) so the
□
air tank drain valve (J) is at the bottom of the tank. Then
open the tank drain valve (J) to allow moisture to drain from
the tank.
C
7
l P
a e
e s
c
n o
a t
G
J
H
U
S
t c
- 1
8 8
- 8
D H
H -
U
K S
f Y
r o
u f
t r
e h
E
Y K
O T
O
S L
C .
O
M
a r
s s
s i
a t
c n
. e
Publicidad
