Publicidad
Idiomas disponibles
Idiomas disponibles
Observe the following instructions regarding usable USB memory devices:
•
As there are numerous different file systems and file formats, the connected stor-
age media cannot be guaranteed to function.
•
Depending on the size of the data medium, it may take some time for the sys-
tem to be detected.
•
USB storage devices with a maximum memory capacity of up to 32 GB are sup-
ported.
•
Supported file systems are FAT16 and FAT32. The supported file format is MP3.
•
External hard disks are not supported.
•
USB extension cables are not supported.
The USB CHARGE
nal devices (e.g. smartphones) using an appropriate USB charging cable
(not supplied).
.. Connecting a device via Bluetooth®
In Bluetooth mode, you can receive wireless audio signals from an external Blue-
tooth-enabled audio output device. Make sure the two devices are not more than 10
metres apart.
Only one Bluetooth device can be paired with the sound system at a
time.
To connect a Bluetooth-enabled audio output device, proceed as follows:
Switch on the sound system.
Press the
21
BT is shown on the display and the device is in search mode. The Bluetooth LED
flashes quickly during the search.
The sound system attempts to automatically connect itself to the last
audio output device connected via Bluetooth. If this is not possible, the
device remains in search mode.
Switch on the Bluetooth function on your audio output device and activate
search mode on it to pair the two devices.
You will find more information about the Bluetooth function of your au-
dio output device in its user manual.
The device name of the party speaker "MD 44232" will be displayed in the device list
on your audio output device as soon as the signal is found.
Select the sound system and pair the two devices. If you are prompted to enter a
password, enter "0000".
150
port is intended exclusively for charging exter-
25
button several times as required to switch to Bluetooth mode.
5
Publicidad
