AXXAIR SAEX-00 Instrucciones Originales página 22

INNOVATIVE ORBITAL SOLUTIONS
1.2 Requirements for the person responsible:
In the workshop / outside / onsite
The head of the company is responsible for the security in the machine's workplace and must only allow
qualified technicians to use the machine in the danger area.
About staff's safety
The instructions described below must be observed and applied for the operator's safety. The use of
personal protective equipment (PPE) is mandatory.
1.3 Intended use of the machine
The SAEX electric rotation is designed to motorize the rotation of the machine frames listed in §2. The
cutting / bevelling motor must be plugged to the SAEX so as securities can work properly (stop button and
cutting/bevelling motor overload). The SAEX must not be used before mounting on machine frame.
WARNING, do not modify any parts of the machine!
The user will be the only person responsible for damages caused by improper use. An improper use of the
machine will void the warranty.
1.4 Safety instructions:
It is strictly forbidden to use the machine outside during a stormy or a rainy weather!
The machine must only be used by qualified technicians who have been trained to use the equipment.
This machine should be used only for the job for which it was designed.
Keep your working area tidy. Untidiness increases the risks of accidents.
Maintain tools with care. Keep the machine clean for a better and safer performance.
Always work in a well-lit place.
When not in use, tools should be stored in a dry, secure place. The machine should be stored in a dry and
properly ventilated place.
Stay alert. Watch what you are doing. Use common sense. Do not operate tool when you are tired.
Use AXXAIR accessories only.
Repair by experts only. The machine is in accordance with the relevant safety rules. Damaged parts should
be properly repaired or replaced by an authorised after-service centre. DO NOT USE MACHINE IF
DAMAGED
WARNING! In order to reduce all risks of possible body harm when using electric equipment. PLEASE
READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THE MACHINES. Keep these safety
instructions.
When the machine must be stopped for a long period (end of a working day or for holidays), it is better to
disconnect the mains power.
Do not expose the electric tools to the rain. Do not use them in a humid or wet environment or in the
presence of inflammable gases or liquids. Protect yourself against electric shocks. Avoid being in touch
with areas related to the ground.
Use appropriate extension cords. When using the machine outdoor, use only extension cords intended for
outdoor use.
Join experience
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
ENGLISH
330B Route de Portes Les Valence - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - commerce@axxair.com - www.axxair.com
-22-