Technical Specifications; Accessories Provided; Installation Specifications - Urmet 1092/222 Manual De Usuario

ENGLISH
PRECAUTIONS
•
Make sure that the device is intact after removing it from the package.
•
Disconnect the device from the mains before cleaning or maintenance. Do not use spray products to
clean the device.
•
Check that the working temperature is within the indicated range and that the environment is not
particularly humid.
•
If installed in outdoor, don't expose it to direct rain or high temperatures.
•
Disconnect power by means of the circuit breaker in the event of a failure and/or bad operation.
•
The device can only be opened by qualified technical personnel.
•
Exclusively contact an authorised service centre for repairs.

TECHNICAL SPECIFICATIONS

Type of sensor: .................................................................................. 1/4" HIGH Resolution CMOS Sensor
Sensitive element::..........................................................................................................976 pixel x 582 pixel
Optics: ...................................................................................................................................... f 3,6 mm / F2
Framing angle: ......................................................................................................................................~ 70°
Resolution: ..................................................................................................................................... 700 TVL
IR CUT FILTER: ..................................................................................................................................... YES
Synchronisation: ............................................................................................................................... Internal
Shutter control: ............................................................................................... 1/50 ~ 1/100.000 sec (AUTO)
Back-lighting compensation: ................................................................................................................ AUTO
White balancing: .................................................................................................................................. AUTO
Gain control: ........................................................................................................................................ AUTO
Minimum luminosity: ................................................................. 0,01 Lux/F1.2 AGG ON (0 Lux with IR ON)
Number of LEDs: ....................................................................................................................................... 24
Led opening angle: .................................................................................................................................. ±30
Max IR range: ........................................................................................................................................ 15 m
Video output: .......................................................................................... composite output 1 Vpp, 75 Ohm
S/R ratio: ........................................................................................................................................... >48 dB
Power: ................................................................................................................................... 12 Vdc (±10%)
Consumption: .............................................................................................................. 280 mA (with IR ON)
Connectors: ......................................................................................................... Video BNC – Power Jack
Degree of protection: .............................................................................................................................. IP66
Working temperature range .............................................................................................................. 0÷+45°c
Storage temperature range: ............................................................................................................. -40÷60°c
Dimensions (Ø x L): .................................................................................................................. 60 x 145 mm
Weight: ................................................................................................................................................380 gr

ACCESSORIES PROVIDED

•
1 Allen wrench.
•
Instruction manual.
Important note:
Accessories may be changed without prior notice.

INSTALLATION SPECIFICATIONS

•
Avoid pointing the lens directly towards the sun or intense sources of light also when the camera is off.
The subject must not be backlight.
•
Some lighting systems (e.g. coloured fluorescent lights) may false the colours.
•
Arrange a suitable circuit breaker and fuse upstream of the devices.
•
Make sure that the rating plate data correspond to the power specifications before connecting the
device to the mains.
4
DS1092-152