Publicidad
Idiomas disponibles
Idiomas disponibles
APP
You can control and view information and data about this product through the app. For detailed usage
instructions, please refer to the WiFi Connection Instructions:
EPS Function
This product supports the EPS (emergency backup power) function. Connect the power grid to the AC input
port of this product using the AC charging cable; it operates in Bypass mode (AC power comes from the grid,
not the battery). In the event of a sudden power loss from the grid, the product can automatically switch to
battery power supply mode within 14 milliseconds. At this time, it functions in inverter mode. Please note that
this function does not support 0 milliseconds switching. Avoid connecting it to devices that require high
uninterrupted power supply, such as data servers and workstations, unless compatibility is confirmed through
multiple tests. It is recommended to use only one device at a time to avoid overload protection. If the device
does not operate normally or data is lost due to failure to follow instructions, we will not be responsible.
Maintenance
1. It is recommended to use or store the power station in an ambient temperature of 20~30℃. Keep it away
from water, heaters, and metal parts, and store it in a dry and ventilated place.
2. For long-term storage, charge and discharge every 3 months, i.e., discharge to 0% then charge to 100%.
3. For safety, do not store the power station with a temperature above 45℃ or below -10℃.
4. If the capacity is lower than 1%, please charge it to 60%. Long-term storage with a serious power shortage
will cause irreversible damage to the cell and shorten the service life of the product.
5. If the capacity is seriously insufficient and idle time is too long, the product will enter deep sleep mode,
and it can only be used after being charged.
6. After charging or discharging this product, wait for more than 30 minutes before using it.
Publicidad
