Bort Generation 215 000 Instrucciones De Uso página 9

– do not make any changes to the product
– do not wear it on open wounds
– do not use in case of intolerance of one of the materials used
– no re-use. This medical aid is intended for treating one patient only
– whilst wearing the support, please neither use any creams nor ointments
on or around it as they can destroy the material
Fitting instructions
If required, the plastic splint material can be individually adapted by an
orthopaedic technician at a temperature of approx. 180 °C. Let the reshaped
splint cool down and then re-insert it into the support splint bag.
1
Open the lacing before putting it on.
2
Pull the support over the hand up to the lower arm.
3
Adjust the lacing to the desired width.
4
Close the support by attaching the Velcro fastener on the intended
surface in the wrist region using Velcro.
Removal
Open the Velcro fastener and pull the support off over the fingers. Close the
Velcro fastener in order to avoid early wear to the Velcro surface.
EN
09