1.
Explanation of the symbols on the device
m
Warning! The electrical connection must be established by an electrician and must comply with IEC 364. It is
recommended that a residual current circuit breaker be installed in the electrical connection to this device, which
disconnects the mains voltage if the residual current circuit breaker exceeds 10mA for 30 ms.
20 | GB
Observe warnings and safety instructions!
Read the operating and safety instructions before start-up and follow them!
Wear eye protection!
Wear hearing protection!
If dust builds up, wear respiratory protection!
Danger of injury due to a rotating tool! Keep your hands away.
Keep third-parties away from the danger zone.
The product complies with the applicable European directives.
www.scheppach.com