i-tec iViewer 10- Wifi Manual De Instrucciones página 20

ADVANCED MECHATRONIC SOLUTIONS
iViewer 10-WIFI
Installation:
When installing the display, first confirm the thickness of the door. Then choose the screws according
to the thickness of the door.
1. Choose the right screws according to the
thickness of the door. (Note- be careful, please do
not break the cables).
4. Align the camera plug with the mounting plate.
7. Align the display and insert into the stand.
10. Press the test button.
2. Place the cable through the door, from the
outside in. (Note- if the door is thick, please wrap
the cable in paper avoid breaking it).
5. Place the cable plug in the wire slot.
8. Press the display on the stand.
www.itec.com.pt
controlo de acessos | access control | control de acesso | crontrôle d' accès
3. On the inside of the door, place the cable
plug and the screw goes through the mounting
plate. (Note- please do it carefully not to
break the cable).
6. Align the slot under the machine with the
mounting plate buckle.
9. Arrange the cables carefully. Align the display
and insert into the bracket by pressing down.