How To Install The Skirt - Clarke American Sanders 1600DC Manual Del Operador

Figure 7
Figure 8
Clarke American Sanders Operator's Manual (EN) - Floorcrafter
®
HOW TO PREPARE THE MACHINE FOR OPERATION
How to Install the Dust Control Skirt
To install the skirt, follow this procedure:
1. Wrap the skirt around the bumper such that the draw string can be
inserted into the recess of the bumper. See figure 7.
2. Orient the brush fastening strap at the rear of the machine to prevent
scratching surfaces.
3. Tighten and tie the string on the skirt into a bow knot so it can later
be untied for removal of the skirt.
4. Twist the ends of the string (see figure 7) and insert them into the
recess of the bumper as shown in figure 8.
NOTE: The skirt should be stored flat on the floor either on or off
of the machine.
ENGLISH
EN
- 7 -