Create VEGAN MILK MAKER Manual Del Usuario página 11

M IXIN G CHAMB E R CLEANI NG
1. Menu selection
Press Clean/Dry function to choose Cleaning or Hot drying, the light will flash while the func-
tion is selected.
2. Start cleaning function
Press Start/Cancel button to start cleaning countdown. Cleaning and heating function can be
cancelled during the whole process.
• After all the functions are finished normally, open the lid and dry the grinding, no need to use
the hot drying function.
• The heating effect is related to the room temperature, the amount of water stains and the
distribution of water stains.
• A small amount of residual water will be drained from the pulp outlet during hot drying.
Please place a drip tray to prevent liquid from flowing out.
• In the standby state, long press the Capacity + Timer button to open the valve to discharge
the drink. If the drink in the Mixing chamber is too viscous or there are lumps that are not
crushed, please take out the lumps and use the cleaning function to solve it. It is forbidden to
discharge the drink manually to avoid clogging the drink pipe.
SPARE PART S CLEANI NG
• The water tank, lid of mixing chamber, drip tray and steam valve can be removed from the
machine to be cleaned with water.
• When the use of too much ingredients result in an obstructed dispense valve, please remove
the remaining ingredients in the grinding compartment, manually clear the dispense valve,
and use the "cleaning" function to clear the system.
• After removing and cleaning machine components, it is recommended to either manually
dry or let the components air dry before reassembling and the storing the device in a dry and
ventilated space.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of
waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment,
on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the
environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal
of the product by the user involves application of the administrative sanctions according to the laws.
MAINTENANCE
E NGLI SH
11