Picture Setting - npg DHT618M Manual De Usuario

Basic Operation
Disable the Skip Channel function:
Select the Skip channel and press the GREEN button on the remote control to
cancel.
Move a TV or Radio Program
1. Select the preferred then press the RED button. A move symbol will appear.
2. Press PR+/PR- to move the
3. Press OK to confirm.
4. Repeat the above steps to move more channels.
Lock Program
You can lock selected programs for restricted viewing. Lock a TV or Radio chan-
nel:
1. Select the preferred channel then press the YELLOW button. A lock-shaped
symbol is displayed. The channel is now marked as locked.
2. Repeat the previous step to select more channel.
3. To confirm your setting and exit the menu, press the EXIT button.
4. Press the YELLOW button to disable the locked channels function.
5. To view the locked, you will be required to enter either the default password
'000000' or your last set password. The master unlock password is '888888'.
(b) EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows scheduled programs seven days
in advance for every tuned channel. Press the EPG button on the Remote Con-
trol to access the guide.
You can use the PR+,PR- key to select
the preferred program. If there is
more than one page of information, use
the BLUE button for page up and
the YELLOW button for page down.
(c) Sort
Sort your channels from the following options:
[By LCN] - Sort the channels in ascending order.
[By Service Name] - Sort the channels in alphabetical order.
[By Service ID] - Sort the channels according to the station.
[By ONID] - Sort the channels according to ONID.
(d) LCN (Logical channel number)
Set LCN on or off.

(2). Picture Setting

To access the Menu, press MENU then
select [Picture] using the RIGHT/LEFT
key. The Menu provides options to adjust
the video settings. Press PR+/PR- to se-
lect an option and press RIGHT/LEFT to
adjust that setting. Press EXIT to exit the
menu.
(a) Aspect ratio-auto, 4:3; 16:9
(b) Resolution
You can change this setting if the picture resolution does not appear to be co-
rrect.
This setting is to match the most common setting for HDMI.
[480P]: for NTSC TV system.
[576P]: for PAL TV system.
[720P]: for NTSC or PAL TV system.
[1080I]: for NTSC or PAL TV system.
(c) TV Format
If the picture does not appear to be correct you can change this setting.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
(d) Video Output
Select between CVBS and RGB.
6