Descargar Imprimir esta página

YATEK EC500 Manual Del Usuario página 16

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

5. Troubleshooting of the Counterfeit Banknote Detector YATEK EC500
Error Code
E0~E11
EH/EC
EJ
CF0
CF1~CF7
CF8
CF9
6. WARRANTY
1. The warranty period is 2 years since you receive the counterfeit
2. To validate the warranty, get in touch with support@yatek.eu
WARNING!
The manufacturer´s warranty won´t be valid for damages in the following scenarios:
• When the indications of the manual are not followed.
• When the cleaning and maintenance is not properly done.
• Damages caused by droppings, shocks or impacts.
• Improper handling, used for inappropriate purposes or accidents.
• Overheating due to accumulated dirt on the sensors and rollers from the counterfeit
detector YATEK EC500.
• When unauthorized personnel try to repair the device.
• Damages due to usage on not suitable environments.
HTTPS://WWW.ELECTROPOLIS.ES
Error
1. A note was jammed in the machine. Turn off the power
and remove the banknote carefully.
Sensor
2. If the display shows this error but there is no note in
Error
the machine, please clean the sensors or replace the
damaged sensors.
Please insert the note correctly as shown in photo ① or
Size Error
②.
Skew Notes Please insert the note as shown in photo ① or ②.
UV Error
IR Error
MG Error
MT Error
detector YATEK EC500
Imported by B02500619
Please recheck the note as the feed in picture
① (USD/CHF/INR/Korea W/etc.) or picture
② (EUR/GBP/SEK/etc.) again to confirm it's
counterfeit note or not.
Solutions
15

Publicidad

loading

Productos relacionados para YATEK EC500