Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION NOTES
Determine the desired position of the display and any accessories
(e.g. conference cameras) on the VESA mount. Make sure that your display
or accessories do not hit the ceiling, door frames or similar when the display
stand is raised. Otherwise injuries or damage to the products can occur.
Note: Make sure that the display used, including any accessorries, does not
exceed the max load capacity of 120 kg.
STEP 1 I MAKING THE CHASSIS
Place the two lifting columns with the motor housing on the floor so that the
two motor heads face each other (Fig. 1). Now screw the crossbar incl. the
stabilisers with the pre-assembled rollers on the lifting columns using the
M6x60 screws.
Attention: Be sure to bolt the backing plate to the underside of the stabilisers
as shown in Fig. 3.
Fig. 3
Fig. 1
Fig. 2
4
Publicidad
