Create Warm Clear Manual De Instrucciones página 10

Ø 10mm
1050 mm
4. Drill the holes in the wall with a Ø10mm
drill bit and insert the corresponding
plugs.
Note: Before plugging in the unit, make sure the heater is securely attached to the wall.
10 E NGL I SH
5. Then firmly fix the hanging bracket to the
wall with the screws and a Phillips screw-
driver. Make sure the hanging bracket is in
the correct direction.
6. Gently insert the bottom of the heater into
the bracket, then push the upper body of
the heater onto the bracket to hang. We
recommend that you do this several times
before fixing it on the wall.
7. When the heater is attached to the bracket,
secure it in place by turning the two locking
handles with a long screwdriver.