Hood has an air vent at the top to extract cooking odors to the outside.
Normally, extracted air is evacuated vertically. If there is a suitable recess above your kitchen, the
exhaust air is evacuated through the wall modules and through the base of this recess to the
outside.
If your kitchen has a duct under the wall modules, the exhaust duct can be installed so that the
exhaust air can be discharged horizontally through the wall.
.
Re-circulation mode
If it does not have a direct exhaust opening to the outside, the hood can also be operated in re-circulation
mode (i.e. without an exhaust opening to the outside, the filtered air is returned to the room). In this case,
an activated carbon filter must be used as described in "Installing the activated carbon filter for circulation
mode".
Activated carbon filter is not provided. You can order it from your dealer or accessory store.
Assembly
WARNING:
When assembling or inserting the extractor filter and the charcoal filter, the appliance must not be
connected to the power supply.
If mounting accessories are not used, there is a risk of electrocution.
CAREFUL:
Before installation, check that the wall or wall module has sufficient load capacity to support the hood.
When drilling holes in the wall, you should always make sure that there are no electrical wires or
other objects that can be damaged.
Make sure the ventilation openings are unobstructed.
27
d