Maintenance; Electrical Specifications - OPTIKA MICROSCOPES XZ-2 Manual De Instrucciones

5.0 MAINTENANCE

5.1 Always think about
- The following environment is required: Indoor temperature: 0-40°C, Maximum relative humidi-
ty: 85 % (non condensing).
- Keep the microscope away from dust and shocks while in use.
- Turn off the light immediately after use.
- Use a soft lens tissue to clean the optics after use.
- Only if needed, use a cloth moistened with water and a mild detergent, rinsing with water and
drying immediately with a lint-free cloth.
- After use, cover the microscope with the included dust-cover, and keep it in a dry and clean
place.
5.2 Do not!
- Wipe the surface of any optical items with your hands. Fingerprints can damage the optics.
- Use solvents, neither on the microscope, nor on the optics.
- Disassemble objective or eyepieces to attempt to clean them.
- Mishandle or impose unnecessary force on the microscope.
- Clean the unit with volatile solvents or abrasive cleaners.
- Attempt to service the microscope yourself.
5.3 If you need to send the microscope to OPTIKA for maintenance, please use the original packa-
ging.

6.0 ELECTRICAL SPECIFICATIONS

Power Supply:
INPUT:
OUTPUTS:
100-230 Vac, 50/60 Hz
LED ring: 12Vdc 0.5A
Digital camera: 5,5Vdc 200mA
LCD screen: 12Vdc 2,6A
Page 19