Publicidad
Idiomas disponibles
Idiomas disponibles
FAQs
No.
Fault
Unable to charge
1
the main engine
No response from
2
handle buttons
The mopping pad
3
stops rotating
Battery battery
4
indicator keeps
flashing
Notes
Safety protection: When the mopping pad is overloaded, the safety device
will be triggered to stop the pad and restart, so as to prevent sudden
product failure, or safety failure caused by over heating of lithium battery.
Portable use: You need to lift the electric mop upward in the process of
moving or lifting it. If you hold the handle to lift it, overweight will cause the
handle to break.
Battery status: Current battery level is displayed on the battery indicator
FAQs and Notes
Likely cause
Poor connection
between the power
adapter and the item
Power of the main
engine is not turned
on
Run out of battery of
the handle
Interfering signal from
IR equipment nearby
Foreign matters block
the rotating disc
Overload protection
due to excessive
downward pressure
Low battery
8
Solution
Plug the connector of
the charger cable
properly
Turn on the power of
the main engine
Replace the battery and
assemble properly
Avoid use of IR
interference equipment
nearby
Check the disc for
foreign matter and
restart
Restart and operate
properly
Battery needs to be
charged
Publicidad
