Audeara A-02 Guia Del Usuario página 8

1. Place your Headphones in Pairing Mode
Power your Headphones on by flicking the Power Switch up
This will make the Power Indicator flash blue.
Your Headphones will also provide an audible prompt that says "Power On".
Hold down the Multifunction (middle) Button for three seconds
This will make the Power Indicator flash blue and red.
When in pairing mode, your Headphones will also provide an audible
prompt that says "Pairing" followed by a repeated chime while in
pairing mode.
Multifunction Button
14
Power Indicator
Power Switch
2. Connect to a mobile device
On your mobile device, navigate to Settings > Bluetooth and ensure
Bluetooth is turned on
You should see "Audeara A-02" in the device list. If it doesn't appear, see
step 1.
Tap on "Audeara A-02" to pair to your device
Once the device is connected, your Headphones will stop flashing blue and
red and you will also hear an audible prompt that says "Connected".
3. Connect to a second mobile device (optional)
Your Headphones can pair to two devices at the same time
With your Headphones already connected to the first device, repeat steps 1
and 2 with the second device.
Turn your Headphones off and then on again using the Power Switch to
connect to both paired devices.
15