Publicidad
Idiomas disponibles
Idiomas disponibles
Button / port
Short press to increase volume.
1. Volume up
Short press to decrease volume.
2. Volume down
• Press and hold to enable TWS mode (go to Section VI for details).
3. Multi-function button
• Short press to toggle between modes.
Press to go to the previous song.
4. Previous track
• Press to play or pause your music.
5. Play / pause
• Use it to manage your phone calls with your speaker
(go to Section VII for more details!).
Press to go to the next song.
6. Next track
• Press and hold to turn the speaker on or off.
7. Power button
Hear this: By default, your ZoundFire Pro will turn on Bluetooth
mode and with volume at 70%.
• Long press to turn it on or off.
8. Light switch button
• Short press to toggle through lighting options.
Use it to play audio files stored in a USB flash drive.
9. USB play / output
Connects to compatible devices via the provided 3.5mm stereo
10. Aux port
jack cable.
Charges the speaker's built-in battery with the provided
11. USB-C charging port
charging cable.
Allows music playback from compatible files stored in a microSD™
12. microSD card port
memory card.
IV. Charge!
You know what people say —no charge, no fun.
(Okay, people don't say that but you get the point). Use the provided USB-C cable
to charge your ZoundFire Pro, which will start charging as soon you plug the cable
in. You'll know it's charging because the red indicator will stay on. When the battery
is fully charged, the indicator will turn off.
What it does
Your speaker will take around 6 hours to go from
low battery to fully charged.
Good warnings! When the battery is low, the speaker will perform a low battery
tone three times before it shuts down.
V. It's a match!
Pairing your ZoundFire Pro with a Bluetooth
You've probably done this a million times. If not, just follow these simple steps:
1.First, set your speaker in Bluetooth mode. You'll see the white LED light will blink
pretty fast. Then, set your smartphone to "discover" Bluetooth
Place both things pretty close to each other —three
feet or less.
2. On your phone look for "KBS-350," which is ZoundFire Pro's technical alias.
Click on it. When pairing is successful, you'll hear a sound tone to confirm the process
is complete. Also, you'll see the LED light blinking slowly.
Once this happens, you'll know it's a match!
compatible device
®
compatible devices.
®
Publicidad
