Publicidad
Idiomas disponibles
Idiomas disponibles
TWS FUNCTION:
1. Turn ON two identical speakers you want to pair. Please note that they must
have the same BT pairing name, both under BT mode. You only need to set up
one of the two units.
2. Press and hold the "PLAY/PAUSE" button for around 4 seconds. The speaker will
make a tone "di" to start pairing and will repeat the "di" voice three times once
successfully paired.
3. Connect Wireless BT with your mobile phone to play music through the two
paired speakers to create a more powerful surround sound e ect.
4. If you want to exit the TWS mode, press and hold the "TWS" button (of the unit
that you set at the beginning) again to exit the TWS function.
Remark:
You can connect the TWS function through either Wireless BT or AUX, but if you
connect your mobile phone via the provided audio cable, you cannot switch to
Wireless BT mode by pressing the Mode button.
AUX IN:
For other compatible music devices or your MP3/MP4 players, use the supplied
audio line cable to connect from the device's "Line Out" to the "Aux In" of this
device. You will hear an "Aux input mode" tone once the cord is inserted.
When using an external device, all functions can be controlled by the external
device except pause.
6
www.PyleUSA.com
Publicidad
