Publicidad
Idiomas disponibles
Idiomas disponibles
Always unplug the appliance from the socket before removing or connecting parts. Make sure that the
dust reservoir is always in the correct position.
FLEXIBLE HOSE
·
Assembly: Insert the flexible hose connector into the connection opening at
the front of the vacuum cleaner and click into place.
·
Disassembly: to disconnect, press the button on the connector to release
the flexible hose from the connection opening at the front of the vacuum
cleaner.
TELESCOPIC TUBE
1.
Put the handle of the hose into the telescopic tube.
2.
Set the telescopic tube to the desired length. For this, push the slide on the wand downwards and
pull on the upper part of the wand to extend it. Release the slide button and let the tube snap into
place.
3.
Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the nozzle.
ACCESSORIES
1.
Crevice nozzle: for hard to reach areas like radiators, crevices, corners, in
between pillows,...
2.
Furniture nozzle: for easy, quick and thorough cleaning of upholstered
furniture
3.
Parquet brush: for cleaning hard floors, such as wooden floors, laminate,
tiles, and other smooth floor surfaces.
4.
Dusting brush: for vacuuming delicate and fragile surfaces such as
lampshades, bookshelves, window frames, curtains, etc.
USE
1.
Unwind the cord to a substantial length and plug in the vacuum cleaner. The yellow label on the cord
indicates the maximum length of the cord, that should not be exceeded.
2.
To turn the vacuum cleaner on and off, press the foot pedal with the
3.
The suction power can be controlled by turning the suction power control dial. The vacuum has a
suction power of 15 kPa, which means that the appliance has very strong suction power. This could
cause the end of the floor nozzle to become attached to the floor. If you want to reduce the suction,
you can turn the suction control dial to a lower level or slide open the air regulator on top of the hose
handle.
36
DO7297S
3
4
symbol.
1
2
Publicidad
