Setup For 5.1 Surround Sound - EUROCOM X7200 Panther 2.0 Manual Del Usuario

Concise User's Guide

Setup for 5.1 Surround Sound

To setup your system for 5.1 surround sound you will
need to connect the audio cables to the Line-In, Head-
phone-Out and Microphone-In jacks.
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel) and make sure you are in Classic View.
2. Click Realtek HD Audio Manager (or right-click the taskbar
icon and select Sound Manager).
3. Click Speakers (tab) and click Speaker Configuration (tab).
4. Select 5.1 Speaker from the Speaker Configuration pull-
down menu.
Figure 13 - Speaker Configuration
18 - HDMI Ports
5. Plug the front speaker cables into the Headphone-Out Jack.
6. Plug in the cables (you may require an adapter to connect
each cable to the appropriate jack e.g a stereo mini to dual
RCA adapter) from your speakers as follows:
• Line-In Jack = Rear Speaker Out
• Microphone-In Jack = Center/Subwoofer Speaker Out
7. As you plug in each cable a dialog box will pop up.
8. Click to put a tick in the appropriate box according to the
speaker plugged-in (e.g. Rear Speaker Out), and then click
OK to save the setting.
9. Click OK to exit Realtek HD Audio Manager
Figure 14 - Connected Device Auto Popup
.