Publicidad
Idiomas disponibles
Idiomas disponibles
1. PARTS AND COMPONENTS
Fig. 1
1.
Soleplate
2. Spraying nozzle
3. Filling hole cap
4. Mode knob
5. Steam button
6. Water tank
7.
Rear cover
8. Cable protection
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
-
Iron
-
Instruction manual
3. OPERATION
Setting the temperature
-
The device includes an NTC thermistor that detects the soleplate temperature and
adjusts it if necessary.
-
The sole temperature range is 135 to 160 .
-
The preheating time of the iron is 1 minute and 20 seconds: before activating the steam, it
is advisable to let the iron preheat completely.
-
Connect the appliance plug to an earthed socket.
-
After plugging it into the mains, the iron will beep, the indicator will light up blue and the
soleplate will start preheating. At the end of preheating, the indicator will illuminate RED.
Filling up the tank
-
Unplug the iron before filling up the water tank.
-
Fill the tank only with distilled or demineralised water. It is recommended not to use tap
water or other liquids.
IRONHERO 3200 DOUBLE STEAM I-PUMP
ENGLISH
31
Publicidad
