Bosch HMB5050 Manual De Instalación página 10

6 9
Add tape (C) to side air duct (F) and attach to micro-
wave, being careful to align screw holes in top and rear
of side air duct (F) with holes in top air duct (F).
7
Secure side air duct (F) to top air duct (F) using two T-
20 Torx pan head bolts (B).
Prepare Cabinet Cutout
Prepare cabinet cutout according to figures 8-10.
8
a=b
Align baseplate (t) with two tabs as shown and a center
line drawn or scribed on the cabinet bottom and visible
in center front slot.
0
_dia. 1/16
'4
Drill pilot holes and attach cabinet fixing brackets (G)
using two phillips flat head screws each side.
Note: A block of wood may need to be added behind
the cabinet front, flush with the cabinet opening, to
secure the bracket.
Fold up baseplate tabs to approximately 95 degrees.
10