Descargar Imprimir esta página

Ecler VIDA Serie Manual De Usuario página 22

Publicidad

REMOTE CONTROL CONNECTIONS
External MUTE
LOCAL CONTROL
Attenuators
Output mode settings
RUN/SLEEP mode
Power ON/OFF
CONNECTIVITY
DANTE™/ AES67 Protocol
Programming and control
MONITORING
Signal Present
Standby / Mute
Dante™/ AES67
ON / OFF
No
x4 GPIs (0-10V)
GPIs
Function and settings by embedded web application
5-pin Euroblock connector, rear panel. Euroblock pitch 3,5
mm
GPOs
x4 NC / NO contacts
4x 3pins Euroblock connector, rear panel
Euroblock pitch 3,5 mm
Yes, contact (2 pins Euroblock connector, rear panel,
Euroblock pitch 3,5 mm)
Programmable Front panel knobs (defaults: Amplified OUTs
attenuators)
Lo-Z/Hi-Z, 70V/100V, 4Ω/8Ω/2Ω
Output mode selection per channel
(Rear panel DIP SWITCH selectors)
Yes, front panel push-button (operate when pressed more
than 0,5 seconds)
Yes, back panel switch (red LED indicator)
Ethernet
Ethernet Base-Tx 10/100/1000Mb Auto X-Over
(CAT5 up to 100m. Settings by embedded web application)
Dante™/ AES67 4x Tx / 4x Rx channels
Primary and secondary capability. RJ-45 ports
(Settings by embedded web application)
Embedded web application
SP LED (White) per channel (trigger @- 40 dBV)
Clipping
CLIP LED (Red) per channel (Clip, Versa power limiter, Peak
power, Power supply overload)
Protect
PROT LED (Red) per channel (Current overload, Output
short circuit, Under voltage, Over Voltage,
DC OUT (slow blink), HF protect (fast blink)
STBY/MUTE LED (White) per channel
(ON when STBY, BLINK when MUTE)
Limit
LIMIT LED (Red) per unit
(Power (power supply) overload)
Thermal
THERMAL LED (Red) per unit (Temperature limiter)
DANTE™/ AES67 LED (White) per unit (OFF NO WIRE, ON
when MASTER, BLINK when SLAVE)
Data
DATA LED (White) per unit (ON when DATA)
On
ON LED (White) per unit (ON when RUN,
SLOW BLINK when SLEEP by BUTTON, FAST BLINK when
SLEEP by AUTOSTBY, VERY FAST BLINK when HW Fault)
Web
HW
GUI
22

Publicidad

loading

Este manual también es adecuado para:

Vida-24qVida-16q