Ordering Information; Use; Specifications; Maintenance - AEMC Instruments PEL Manual De Instrucciones

PEL Power Adapter for use with Model PEL102 and PEL103 ..............................................Cat. #2137.77
The power adapter is used to supply the device when it is used for an extended period. The internal battery
of the PEL remains charged, enabling the device to continue to operate in the event of a power outage
up to a half-hour.
■ Connect the adapter to the voltage inputs of the PEL.
■ Connect the C7 plug to the
■ Connect the voltage and the current inputs of the PEL as if the adapter were not there.
The L1 and N or L1 and L2 voltage inputs must be connected for the adapter to operate.
The adapter can operate only on 50/60Hz networks (not DC or 400Hz).
Electrical
Range of use
Max. input voltage
Min. input voltage
Max. output voltage
Frequency
Consumption
Environmental
Operation: 32 to 122°F (0 to 50°C) and 10 to 85% RH
Storage: -4 to 158°F (-20 to +70°C) and 0 to 95% RH
Indoor use; Level of pollution: 2
Altitude: < 2000m; Storage: < 10,000m
Mechanical
Dimensions (L x H x D): 3.6 x 2.6 x 1.5" (93 x 67 x 37mm)
Weight: 5 oz (150g) approx
Cord: 11" (300cm) approx
Inrush protection: IP 40 per IEC 60529
IK 04 per IEC 50102
Drop Test: 1 meter
Electromagnetic compatibility: Emissions and immunity in an industrial setting compliant with IEC 61326-1
Specifications are subject to change without notice.
This instrument contains no parts that can be replaced by personnel who have not been specially trained
and accredited. Any unauthorized repair or replacement of a part by an equivalent may impair safety.
Cleaning: Disconnect anything connected to the device. Clean it with a soft cloth moistened with soapy
water. Wipe dry completely.
Repair: For all repairs, please contact the factory or your local distributor.
2

ORDERING INFORMATION

USE

input of the PEL.

SPECIFICATIONS

Phase-to-neutral voltage: 110 to 277V
Phase-to-phase voltage: 110 to 480V
Permanent: 530V ; Transient: 550V
ac
85V (-20%)
ac
360V peak
50/60Hz
100VA max at 50/60Hz

MAINTENANCE

ac
ac
ac
PEL Power Adapter