Activision Chopper Command Instrucciones página 3

CHOPPER COMMAND" BASICS
The object of the game is to accumulate as many points as possible by
knocking out enemy aircraft, while protecting yourself and your truck con-
voys at the same time.
1. Hook up your video game system. Follow manufacturer's instructions.
2. With power OFF plug in game cartridge.
3. Turn power ON. If no picture appears, check connection of your game
system to TV, then repeat steps 1-3.
4. Plug in Joystick Controller/s (solo player uses left Joystick)
5. Set both difficulty switches to b to begin. Switches in this position will
cause fast continuous fire from your chopper when red button is
depressed. Set switches in a position for slower continuous fire.
6. Select game with game select switch:
CADET LEVEL COMMANDER LEVEL
Game 1: one player Game 3: one player
Game 2: two players Game 4: two ployers
7. To start, press game reset and allow helicopter to position itself on
left side of screen. Action begins as soon as you move the Joystick or
push the red button.
8. The Joystick Controller is held with the red button in the upper left
position. Pressing the button will fire cannons. Holding the button down
will activate the continuous fire mode, Pushing the Joystick up will cause
your helicopter to ascend; pulling it back will bring it down. Moving
the Joystick left or right will cause your helicopter to face to the left or
to the right. Pushing the Joystick to the left or to the right will move
your helicopter in that direction