Publicidad
Idiomas disponibles
Idiomas disponibles
REPLACING THE ACTIVATED CHARCOAL FILTER
The Activated Charcoal Filters (FILTER7) are not washable and cannot be regenerated,
and must be replaced approximately every 4 months of operation, or more frequently
with heavy usage.
1. Pull out the sliding suction panel.
2. Remove the grease filters by pushing the release tab towards the side of hood.
3. Remove the saturated carbon filter by releasing the fixing hooks.
4. Fit the new filter by hooking it into its seating.
5. Replace the filter, taking care to ensure that the handle faces forwards.
6. Close the sliding suction panel.
CAUTION: When used in recirculation mode, to Reduce the Risk of Fire and
Shock use only conversion kit Model KITFC7.
22
Publicidad
