• Legs (see fig. 8)
Be sure to move the shaver from
ankle to knee.
• Arms (see fig. 9)
Be sure to move the shaver from
outside to inside.
• Bikini (see fig. 10)
It is recommended for proper shave
to use the pop-up trimmer, sliding
the pop-up trimmer switch up to
make the trimmer pop up to shave
extra long hair.
Cleaning
(After every shaving, you should
clean it.)
Press the outer foil frame release but¬
tons to remove the outer foil frame
(see fig. 2). Rinse the inner blade with
the switch on under running water or
in a basin, and rinse the outer foil
separately (see fig. 5).
DO NOT USE BOILED WATER.
Next, switch the shaver off, close the
outer foil frame and dry it gently. After
the shaving head is dry, place the pro¬
tective cap.
Replacing shaving head
Components
It is recommended that you replace
the outer foil at least every year and
the inner blade at least every two
years to maintain your shaver's cut¬
ting performance.
Replacing the outer foil
Press the outer foil frame release but¬
tons to remove the outer foil frame (see
fig. 2).
Then, squeeze the front and the back
side of the foil frame and lift up one
of the two knobs on the outer foil (see
fig. 3).
Inserting the new outer foil
Slip the foil into the frame and guide
the plastic edges onto the hooks in
the foil frame until it clicks into place.
Replacing the inner blade
(see fig. 4)
Squeeze the system outer foil release
buttons and lift the outer foil frame
upward to remove it. Remove the in¬
ner blade by grasping it firmly at both
ends and pulling straight away from
the shaver. To insert the new inner
blade, hold the blade at both ends
and press downward until it snaps
into place.
ATTENTION:
A nickel cadmium battery that is
recyclable powers the product
you have purchased. At the end
of it's useful life, under various
state and local laws, it is illegal
to dispose of this battery into your
municipal waste stream. Please
call 1-800-8-BATTERY for infor¬
mation on how to recycle this bat¬
tery.
8