Silver Monkey SMXC043 Railing Instrucciones De Uso página 25

1.16 Additional fans. Connection of fans and ARGB lighting.
Additional fans (maximum 140 mm) can be assembled on the top of the case, at the bottom and on the side panel - use the additional screws
included with your fans.
NOTE! The fan speed and backlight controller is not installed in the case. The fans are connected in parallel. Connect the fan power supply to
SYS_FAN, and connect the ARGB backlight to the port depending on the board model: D-LED, ARGB, JRAINBOW, ADDR_LED.
25