VEVOR SUO-5529L Manual De Instrucciones página 6

We recommend that two adults work together to assemble this game.
STEP1:
Open the 2 cartons of your new football table close to the place
where you are actually going to use the table.
STEP2:
Remove all the contents from inside the cartons and verify that
you have all the listed parts as shown on the parts list.We suggest that you
use the bottom carton as a clean flat working area to protect the
table.Carefully cut or tear the four carton corners from the largest carton so
that the bottom carton is now your work area.
STEP3:
Attach one goal end board (#2)between the side board (#1)using
two bolts (#10)and two washers (#11)per side as shown in FIG 1 and 1A.
NOTE:Do not tighten the screws too fast now,in a later step you will have
to do so.
ASSEMBLY INSTRUCTIONS:
4