ResMed AirFit F40 Manual De Instrucciones página 6

Fitting your mask
Remove all packaging before using the mask.
1. Twist and pull both magnetic clips away from the frame magnets.
2. Place the cushion under your nose and ensure it sits comfortably
against your face. With the ResMed logo on the headgear facing out,
pull the headgear over your head. The top headgear strap should sit on
top of your head and not too far forward or back.
3. Bring the lower headgear straps under your ears and attach the
magnetic clips to the frame.
4. If the mask needs adjusting, undo the fastening tabs on the upper
headgear straps and pull evenly. Repeat with the lower headgear
straps.
Mask setting options
Ensure that Pillows is selected in the mask setting options of
your ResMed device. For a full list of compatible devices for
this mask, see the Mask/Device Compatibility List at
ResMed.com/downloads/masks.
English 5