Installation
H Installation in a Bookshelf.
Attach the provided stay (speaker supporter), place the speaker in a bookshelf.
Insert the stay completely
Standing placement
M Hanging
Caution:
1. Before installation, check the wall or ceiling well to confirm that is strong enough to withstand the
weight of the speaker system. KENWOOD cannot assume the responsibility against accidents caused
by the drop of speaker system due to insufficient mounting strength or to any defect in installation.
2. Ifthe material or thickness of a wall or ceiling cannot be confirmed, consult a professional sepcialized
in installation.
e Hanging on a wall.
Mount screw on the wall
Holizontal installation
Vartical installation
e Hanging from a ceiling, Installation using a Speaker bracket.
A couple of M5(5 mm dia.) nuts are attached inside the two bolts @ at an interval of 60 mm (2-3/8"). After
removing the bolts, use these nuts together with pieces of proper hangin hardware (not provided) and hang the
speakers from the ceiling.
e In the same way, the speaker can be installed on a commercially available bracket.
Remove 2 bolts (@)
Mount to Hardware
RS-05 (En) 3