Pusat BUSINESS PRO MINI Manual De Usuario página 4

EN
Pairing
1. Turn on the keyboard.
2. Long press Fn+ Q/ W/ E to enter pairing mode, Fox example, press Fn + Q (BT
1) to entry pairing model for Channel BT1.
3. Press and hold BT1 for 5 seconds, Wait until you see the BT1 blue light flashes.
4. Turn on bluetooth of your Mac to automatically search for remote devices.
5. Tap" PUAST B.PRO.MINI KB' to start pairing.
6. Once the pairing is completed, the blue LED light will stop flashing ( It works
same for BT2/ BT3).
7. You can switch Bluetooth Channels by short press Fn+ Q/W/E (BT1/BT2/BT3 ),
after paired.
Power Management
Power Saving Mode
The keyboard will automatically go to sleep when not in use for 15 Minutes,
press any button and wait 3 seconds to reactivate it.
Auto-Reconnect
If you turn off the keyboard and turn it back on, the keyboard will be
automatically connected to device it paired last time, which means if you use
BT1 and connect to device 1 before you turn it off, it will attempt to reconnect to
device 1 though channel BT1 after you turn it on.
Charging
1. Use the included USB-C cable for charging, Connect one end to a USB-C
adapter and the other to the keyboard ( USB-Cadapter is not included).
2. During the charging process, the power switch indicator will turn red, when the
electricity is full, the light goes off. Generally It takes approximately 3.5 hours
for a full charge. Noted: You can use the keyboard while it is being charged, But
we don't suggest such operation, as this may damage the built-in battery to a
certain extent.
04