B&G Vulcan Serie Manual De Instrucciones página 9

AMAC IMPRESOS • NAVICO • 988-11560-001 • CYMK • 4/4 • 36 PÁGINAS • MEDIDA: 5.83" X 8.27"
Autopilot
Activate the autopilot from any panel by selecting the autopilot tile in the Instrument
bar, followed by selecting a mode in the Autopilot Controller.
S
Standby
FU
Follow-up
Non-Follow-
NFU
up
A
Auto
N
NoDrift
D
N
Navigation
W
Wind *
Wind
W
N
navigation *
* Only available if the boat type is set to Sailboat.
Switching from automatic mode to manual steering
Switch the autopilot to STBY mode from any automatic operation mode from the
autopilot pop-up or using a physical standby key.
Autopilot is passive. Used when manually steering at the
helm.
Manual steering using the rotary knob on a remote
autopilot controller to control the rudder angle.
Manual steering. The rudder movement is controlled by
Port Starboard
the and
or by another NFU unit.
Automatic steering, maintaining the set heading.
Automatic steering, keeping the vessel on a straight
bearing line by compensating for drift.
Automatic steering, navigating the vessel to a specific
waypoint or through a route using GPS data.
Automatic steering, maintaining the set wind angle.
Automatic steering, navigating the vessel to a specific
waypoint or through a route using both wind and GPS
data.
Vulcan Series |
buttons in the autopilot pop-up,
QuickStart Guide - EN
|
9