Publicidad
Idiomas disponibles
Idiomas disponibles
Schematic diagram of injector installation
●
Install the injector adapter and the plug into the fuel distributor
assembly.
●
Install the fuel injector in the forward direction. (Apply a little
grease on the "O" ring of the fuel injector.)
●
Install the fuel distributor assembly and the fuel injectors on
the top assembly plate and tighten and fix it with a fixed screw
nut and a fixed screw sleeve. Get ready to test.
●
Select 12V / 70V / 120V according to injector type.
Steps
Item 02 Idle Speed Test
Connect the quick connector of the black outlet hose on the
●
machine with the male end connector on the fuel distributor
assembly, and insert the pulse line of the fuel injector.
●
Press the item selection up and down keys to select the "02
Idle Speed Test" item.
●
Press the working time up and down keys to set the time.
(Normally set to 10 minutes.)
●
Press the "run" key to start working.
●
Rotate the pressure adjustment knob to adjust the pressure to
2-5kg. (In the electronic spraying system, the oil pressure is
generally 2-5kg.)
●
Press the up and down keys to select the appropriate pulse
width. (The system defaults to 3ms, generally adjusted to
3ms.)
9
Fuel distributor
assembly
Adapter for fuel
injector
Injector
Publicidad
