Publicidad
Idiomas disponibles
Idiomas disponibles
2. Take out the battery cover.
3. Put the battery (CR2025) into the remote control and place the battery cover on the
battery compartment making sure that the arrowhead icon on the battery cover is alig-
ned with the unlock icon on the remote control. Then, with the help of a semi-circular
thin object, turn the battery cover clockwise to the locked icon.
INSTALLATION
1. Install the fan in the following sequence as in the picture.
Picture 1
Picture 2
2. After unpacking, check whether the body is in good condition and whether there is
any defect.
* First remove the screw at the bottom of the short connecting rod, insert the short rod
into the chassis and fix it together with the screw (Picture 1).
* Connect the connecting seat of the fan head with the long rod, fix the long rod toge-
ther with the short rod (Picture 2)
Notice: When assembling and disassembling, please screw the connecting rod instead
of pulling the machine head.
OPERATION
Plug the fan into the standard domestic socket to put the product in standby.
POWER button:
Push POWER button to switch the fan into operation at low level speed (F1). Push it
again to select standby mode.
SPEED button:
Push SPEED button to select MIDDLE (F2), HIGH (F3) or LOW (F1) fan speed. With each
15
Publicidad
