Publicidad
SMART TV CONNECTIONS
Smart TV models and their apps support di erent connection methods. Some support both Wired
USB and Bluetooth Wireless connections while others only support Wired USB. Read below for
details on how to setup the controller for Wired USB, 2.4GHz Wireless (using the included USB
Wireless Adapter) and Bluetooth® Wireless connections.
CONNECT USING 2.4GHz WIRELESS
1. Set the Mode Switch on the back of the controller to 2.4G and plug the included USB Wireless
Adapter into an available USB port on your compatible device.
2. Power on the controller by pressing the home button.
3. The controller pairs to the USB Wireless Adapter. The Status LED turns ON, not flashing.
CONNECT USING BLUETOOTH® WIRELESS
1. Check your device supports Bluetooth® Wireless.
NOTE: It is recommended to remove the USB Wireless Adapter from any device as the controller
automatically searches for this connection.
2. Check the controller is OFF and set the Mode Switch on the back of the controller according to
the device you plan to connect the controller to (either iOS, Android or PC).
3. Press and hold the home button to power ON the controller and place it into pairing mode (the
Status LED flashes quickly to indicate pairing mode).
4. The controller is now discoverable as WIRELESS CONTROLLER on the device that supports
Bluetooth®. Follow the instructions on the device to complete the pairing process. If connecting
to a Smart TV app, you may need to select "pair a controller" from within the app itself to display
the Bluetooth device list and allow the TV to search for the controller.
NOTE: If it takes too long to connect to the device, the controller may exit pairing mode. If this
occurs, power OFF the controller and repeat step 3 above.
04
Publicidad
