Publicidad
Idiomas disponibles
Idiomas disponibles
▸
Do not exceed the rated capacity of the jack.
▸
This jack is only designated to lift vehicles and
must be supported by an appropriate aid.
▸
Never work on, under or next to the loaded jack.
Keep other people out of the danger zone.
▸
Only use the lifting points on the vehicle that are
indicated by the manufacturer.
▸
Some vehicles require an adapter for the frame
for lifting.
▸
Observe the instructions for use of the manufac-
turer for the correct lifting of the vehicle.
▸
No changes must be made to this device.
Capacity
Item no.:
071554925
0715549025
07155493
Intended use
The jack is only provided for lifting the vehicles. Use
only original Würth accessories. Any other use or
use beyond this scope is considered improper use.
The user is liable for damage in the event
of improper use.
Device elements (fig. I)
1 Front axis
2 Support saddle
3 Lifting arm
4 Cover
5 Handle
6 Handle socket
7 Handle swivel pin
8 Steering rollers
9 Oil tank
10 Oil fill plug
10
Special safety instructions
Min.
height
[t]
[mm]
2.5
75
2.5
100
3.0
70
▸
Only fixations, retaining devices or adapters
supplied by the manufacturer are allowed to be
used.
▸
Do not move the vehicle while it is on the jack.
▸
Only use on firm and level ground, which can
support the loads indicated.
▸
Block the wheels of the vehicle.
▸
Prior to lifting, align the saddle in the centre with
relation to the weight.
▸
Do not set on edges, screws or at other inappro-
priate points.
Technical data
Max.
Weight
height
[kg]
[mm]
510
28.8
450
26.4
510
51.5
1. Loosen the screw on the handle socket [6].
2. Assemble the handle [5].
3. Put the handle into the handle socket.
Air can enter the hydraulic system via transport.
Deaerate the jack before use. See section entitled
Deaeration.
Lever
length [mm]
1247
1232
1168
Start-up (Fig. II)
Operation
WARNING!
Risk of injury
Failure to perform regular checks can
result in severe injuries.
▸
Prior to use, carry out a visual check
for damaged weld seams, bending,
loose, worn and missing parts or
leakage.
▸
The jack should be checked by an au-
thorised customer service representa-
tive on if it has been subjected to an
abnormal level of load or impact.
Dimensions
LxWxH
[mm]
724x342x153
592x308x173
807x366x165
Publicidad
