brondell EasySpa LES-12 Manual Del Usuario página 6

PRODUCT INSTALLATION
Before installation
Important
Please be advised that the provided
T-Valve should be installed at the fill
valve under the toilet tank, and NOT
at the cold water supply coming from
the wall.
If you do not have access to the fill
valve under the toilet tank, contact
Brondell Customer Service at 1-888-
542-3355. We may be able to provide
alternative options.
Check water supply line
Check the water supply line that
connects the toilet tank fill valve to the
water shut-off valve at the wall. If it is
a rigid pipe, you will need to purchase
a flexible water supply hose to replace
it before installing the EasySpa. The
length of the hose you purchase may
vary, but the top connection size
should be ⅞" ballcock (to connect
to the T-Valve that you will install
under the toilet tank), and the bottom
connection will be ⅜" or ½" female
compression (to connect at the shut-
off valve at the wall).
6