Publicidad
Idiomas disponibles
Idiomas disponibles
Bottom fishing
EN
Attach the camera to the fishing line as shown; there are two fixing ways for the bottom fishing
according to different needs.
Method 1:
Lure Camera
Guide line
After the camera is connected, you can fish normally. It is recommended to sink slowly,
because fast speed will cause impact, and the camera may be damaged.
Float fishing
1. Turn on the camera, then set the buoyancy ring from the charging end of the camera towards
the lens, and make it reach the middle position.
2. Attach the camera to the fishing line as shown.
After the camera is connected, you can fish normally. In a float fishing environment, the user
can review the screen through mobile application in real time within the effective range of
Wi-Fi. However, in the case that the camera is flooded due to strong wind and big waves, the
Wi-Fi signal may be interfered, resulting in the screen lagging.
Method 2:
Lure Camera
Counterweight
Guide line
Connecting the main line
Connect the guide line
Buoyancy ring
Guide line
IV. Parameter List
Camera Parameters
Max. working depth
200 m (656 ft)
2 million, FHD, SONY stellar CMOS Sensor
Aperture
Focus range
0.2M to ∞ away
ISO range
Field of view
Maximum video resolution
Max. video bit rate
Video format
Built-in TF card capacity
Appearance design
Size
Weight
Charger and battery
Charging time
3～4h (Laboratory test at room temperature of 25 ℃)
2.3h (Laboratory test at room temperature of 25 ℃
Endurance
without WiFi)
Other parameters
Camera waterproof rating
IPX8, maximum depth of 200m
2.4GHz/5GHz (not available when in water)
The User' s Manual is subject to update without prior notice.
The latest version is available from CHASING official website: https://www.chasing.com.
EN
Publicidad
