Publicidad
Idiomas disponibles
Idiomas disponibles
Multiple mode (three nails icon) - it is used for serial, continuous
hammering.
3.4.
Cleaning and maintenance
a)
Before cleaning, adjustment or replacement of accessories, and when the
device is not in use, pull the pressurized air supply plug.
b)
Use only non-corrosive cleaning agents for cleaning the surfaces. Wipe the
device with such a cleaner only if necessary.
c)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d)
Do not spray the unit with a stream of water or immerse it in water.
e)
Make sure that no water enters through the ventilation openings in the casing.
f)
Clean the ventilation openings with a brush and compressed air.
g)
Perform regular inspections of the device to ensure that it is in good working
order, that the screws are tightened, and any damage - before each operation.
h)
Use a soft cloth for cleaning.
i)
Do not use sharp and/or metal objects (e.g. wire brush or metal spatula) for
cleaning as they may damage the surface of the appliance material.
j)
For daily use, apply 2 drops of pneumatic oil to the air inlet of the device before
each operation.
DISPOSAL OF WASTE APPLIANCES
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions, or packaging. The materials used in this appliance
are recyclable according to their marking. By reusing, recycling, or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.
TROUBLESHOOTING
Problem
Air leakage near the
trigger
Possible cause
Damaged trigger gasket
Damaged trigger head
Defective drain valve, its
stem or seal
EN
Action
Replace the seal.
Replace the trigger head.
Replace the defective trigger
component.
Publicidad
