Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
11 12
2
1
6
8
4
3
14
13
7
9
10
5
8.645-740.0 Manual Operator - Admiral X/Admiral XL
Controls Locations
1. Main Handle: Used to pull and maneuver
machine.
2. Handle Adjustment: Used to adjust height of
handle.
3. Electrical Cord.
4. Rotary Mode Switch:
5. Off: Turns machine off
6. Deep Extract: This mode is used for deep carpet
extraction. The pump, vacuum motor, and brush
motor will all turn on. When the trigger is pressed,
the deep extract solenoid will open and solution will
dispense at the maximum volume.
7. Eco! Mode (Low Moisture): This mode is used
to improve runtime and efficiency. The pump,
vacuum motor, and brush motor will all turn on.
When the trigger is pressed, the low moisture
solenoid will open and solution will dispense at a
reduced volume.
8. Double Scrub: This mode is used to spot clean
heavily soiled areas. The pump and brush motor
will turn on. There will be no vacuum or recovery in
this mode. When the trigger is pressed, the deep
extract solenoid will open and solution will
dispense at maximum volume.
9. Vac Only: This mode is used for solution recovery.
The vacuum motor and brush motor will turn on.
There will be no solution flow in this mode even
when the trigger is pressed.
10. Accessory Tool: This mode is used for upholstery
cleaning. The pump and vacuum motor will turn on.
When the trigger on the accessory wand is pressed
solution will flow.
11. Brush Motor Circuit Breaker. 6 amp. Breaker
protecting brush motor.
12. Vacuum Motor Circuit Breaker. 15 amp. Breaker
protecting vacuum motor.
13. Smart Speed Indicator Light: Provides cleaning
speed feedback to the user to ensure optimal
cleaning. The light is only activated in modes that
the pump is on. The light will stay solid green when
the machine is operated at optimum speed. If the
machine is operated too slow, the light will slowly
flash red. If the machine is operated too fast, the
light will quickly flash red.
Publicidad
