Descargar Imprimir esta página

Kokido EV18 Manual De Usuario página 7

Limpiafondos inalámbrico recargable

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
Set-Up Before Use
Main Body and Vacuum Head Assembly
Align and insert the main body's nozzle into the
vacuum head's hole. Make sure the nozzle is
completely inserted into the hole, and the small
tab located on the nozzle opening is secured in
the hole inside the vacuum head, as shown.
To detach the main body from the vacuum head,
follow the directional marking to turn the main
body until it stops, and then detach the main
body.
Filter Bag Assembly
Spread the filter bag over the
main body of the pool vacuum.
Make sure the cord of the bag is
placed under the flange.
Pole Assembly
Keep the cord fastener under
the flange. Press on the cord
fastener and pull both cords
simultaneously until it stops.
1 2
2 2
Lift up the bag to ensure it is
totally secured before deploying
the pool vacuum into water.
1 1
1 1
6

Publicidad

loading